Australia

Ace Scaffolding Services - Scaffolding for Aircraft Maintenance, Repair and Access

Leading Australian company Ace Scaffolding Services provide scaffolding for aircraft maintenance, repair and access. Ace products cater for some of the leading models of military fighter planes, including the FA-18 Hornet and the BAE Hawk.

FA-18 Hornet modular work stand

The FA-18 Hornet work stand provides full access to the profile of the aircraft at adjustable level to provide a sturdy yet light and durable platform for maintenance. The work stand is a fully modular system, capable of providing a small footprint and a large work area, easily stored and transportable.
The mobile work stand provides a stable work environment for use by aircraft technicians during the high maintenance and mid-life upgrades of the FA-18 Hornet. The system design provides work stands to the outer and inner wing, tanks and meets stringent Occupational health and safety compliance with the unique handrail for the tail fins.

FA-18 tailwing cantilevered paint stand

The FA 18 tailwing paint stand is a total modular scaffold system with an integrated access stair which is of a welded design, to provide a stable and safe work environment for use by maintenance personnel and painting technicians.
The tailwing paint stand is 2.8m high with cantilever frames installed to provide access to the leading and trailing edges of the FA-18's tailwing. The unique cantilevered base frame design provides a mobile work stand with a small footprint that allows access to the profile of the aircraft whilst clearing both the stabilizer and tailfin of the FA-18 Hornet.

FA-18 pilot boarding platform

The pilot boarding platform is a fully-welded design access platform with a small footprint of 3.4m long x 1.3m wide x 2.080m high with a 300mm cantilever to provide a safe means of access and egress for both the pilot and maintenance personnel.

Hawk adjustable work platform

The Hawk work platform is a fully modular and adjustable scaffold system that is designed and manufactured to fit the profile of the BAE Hawk aircraft. The Hawk work platform provides a stable work environment that is a totally mobile and relocatable work stand for the maintenance and upgrade programme of the Lead In Fighter project.
The unique design provides a small footprint, and efficient storage and transport capabilities while providing a sturdy work platform with a large work environment.

Hawk tailwing integrated access platform

The Hawk tailwing platform provides access to the tail fin of the aircraft whilst integrating with Hawk work platform providing total access to the Hawk Lead In fighter.
The unique design and manufacture provides a total integrated access solution that exceed the requirements and the needs of the client.

Hawk cockpit access platform

The Hawk cockpit access system is a fully welded, yet lightweight, mobile and height adjustable access platform that provides a safe means of access and egress to the cockpit for both pilot and maintenance personnel.

Contact Details

Ace Scaffolding Services
Level 1
12 Alhambra Avenue
Cardiff
NSW 2285
Australia
Tel: (02) 4902 5250
Fax: (02) 4902 5251
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Website: www.acehire.com.au
Website: www.acescaffoldingservices.com.au

COBRA AVIATION

Company founded in 2000 as Tomair Aircraft Sales; subsequently formed Cobra Aviation, for marketing of Arrow and Explorer.

ENDEAVOUR AEROSPACE

Company formed in 2000 to create an Australian general aviation export business. Acquired rights to complete development of, and export, Hawker de Haviliand Wamira turboprop trainer; aircraft will be offered at a competitive price, with emphasis on US private market. Financial backing being obtained in 2002-03. No further announcements had been made by mid-2003.

GIPPSLAND AERONAUTICS PTY LTD

Involved since 1971 in design and modification programmes for a wide range of aircraft, from wooden homebuilts to pressurised turboprops. Conversion of five Piper Pawnees to two-seat configuration in second half of 1980s led eventually to a totally new design, the GA200 crop-sprayer. Second Gippsland aircraft, GA8 Airvan, first flew in 1995 and was delivered to customers from December 2000 onwards. First export Airvan flew in 2001.
Other activities include main spar life extension of Piper Navajo/Chieftain, of which 57 had been refurbished by October 2002.
In October 2002, Gippsland occupied 4,180 m2 (45,000 sq ft) of factory area; personnel totalled 90.

GOAIR PRODUCTS

Company machines, welds and manufactures aircraft components. During the 1990s it designed, built and flighttested the Goair Trainer, production of which is now under way at a low rate. In 2001, Goair completed a replica of the 1920s Westland Widgeon.

Howard Hughes Engineering PTY LTD

Company formed 1984 to design and produce the Australian Light Wing series which has developed from GR-582 via GA-55 to GR-912 and the associated Sport 2000. Most production, undertaken in a 2,000 m2 (21,525 sq ft) factory at Ballina Airport, is for local use and either full certification or registry under AUF rules; around 10 aircraft per year are built. Aircraft for export are issued with Australian certificates of airworthiness.
In 2003, the company announced the LightWing Speed, a low-wing development of the GR-912 family. In early 2003, the workforce numbered 10.

INTEGRITY AIRCRAFT

In May 2003, Mr Watson gave evidence to the Australian House of Representatives Transport & Regional Services Committee hearings, which included details of his company's intention to develop an aircraft able to serve remote communities at "bus fare prices".

JABIRU AIRCRAFT PTY LTD

Jabiru formed 1988 by Rodney Stiff and Phil Ainsworth to produce Jabiru LSA 55/2K, but branched into engine design and manufacture when Italian-built KFM engine, which powered this variant, was withdrawn from market. Now produces 1,600 and 2,200 cc flat-four and 3,300 cc flat-six engines for its own and other manufacturers' aircraft. A factory-built SLA version of Jabiru, the UL 450, was launched in 2000. The company and aircraft are named for Australia's sole indigenous stork. Production averages 100 aircraft and 360 engines per year. A prototype of a four-seat Jabiru, the 1400, first flew in March 2001 and customer deliveries began almost immediately.

SAPPHIRE AIRCRAFT AUSTRALIA PTY LTD

Sapphire markets an updated version of the Winton Sapphire, designed to CAO 19 by Scott Winton. A two-seat version, nominally designated Sapphire Scenic, and a self-launching glider are under development.

SEABIRD AVIATION AUSTRALIA PTY LTD

Seabird Aviation was founded in 1983 to develop the Seeker observation aircraft. Despite having built Seekers for certification, Seabird's business plan was always to franchise Seeker production capability, rather than sell individual aircraft; entire manufacturing equipment for a Seeker production fine can be forwarded in two standard-size ISO shipping containers.
On 25 July 2000, Seabird signed an agreement with Evektor-Aerotechnik (EV-AT) of the Czech Republic leading to the formation of a joint venture company. Evektor- Seabird Pty Ltd, to manufacture and market the Seeker. This had produced no aircraft by mid-2003, when Seabird reached a new agreement with KADDB of Jordan for local assembly in quantity. Accordingly, the aircraft is described under that country.


Index Facebook Search Index Facebook Search