Switzerland

ACEAIR SA

Aceair's unorthodox Aeriks A-200 kitbuilt sportplane was unable to make its debut as scheduled at the EAA's AirVenture at Oshkosh in July 2001, but made a successful first flight in May 2002. Kit production began later that year.

AOS Technologies - High-Speed Cameras and Digital Cameras for Airborne and Military Applications

AOS Technologies is a leading supplier in the design, manufacture and integration of high-speed cameras and digital cameras.

AOS Technologies provides customers with state-of-the-art technology in digital camera technology for use in demanding applications, such as mounted in or attached to aircrafts or unmanned combat air vehicles (UCAV).

The company's activities in the aeronautical industry started in 2002 when it designed a digital high-speed camera for recording store separation tests during test flights. AOS Technologies soon became a reputable supplier for many governmental organisations as well as providing a wide variety of digital imaging systems to a commercial manufacturer.

The design of high-speed digital cameras and digital cameras for long-time recording systems in airborne systems is now AOS's core competence. The camera designs meet MIL 810 and MIL 461 standards, and are tested by accredited test laboratories to ensure high-quality standards.

For special applications, we can provide turnkey solutions for video recording of specific tests or provide custom or semi-custom specific solutions such as data transfer via telemetry system to ground stations, including data processing in camera and bandwidth management for connection to telemetry systems.

High-speed digital camera systems for airforce applications

AOS's high-speed airborne cameras have a reputation for reliable functionality under the most severe conditions. The high-speed cameras can record multiple sequences, store data in the cameras' built-in non-volatile memory and provide data for later motion analysis in the lab. The cameras are all designed to meet MIL 810 standards and are built to meet the challenges of in-flight image data recording.

Digital camera for in-flight image data recording

AOS's digital cameras provide superb specifications for mounting inside aircrafts. All cameras are available with different types of MIL-specified connectors for ease of integration. The cameras comply with GigE Vision standards and can record in standard speed ranges as well as in high-speed camera mode.

High-speed digital video recorder for aircraft

AOS's high-speed streaming system provides full coverage with high frame rates of a complete mission. The data are streamed in high speed to a controller and are ready for analysis either after the mission on the ground, or for transfer via interfacing to the onboard telemetry link to ground station.

High-speed digital camera integration

For many applications, high-speed cameras need to be adapted for specific aircraft. AOS provides a special enclosure for cameras, as well as specific software functions, and an extension of functionality that is vital for the test set-up. In addition, AOS can support these solutions throughout their full lifecycle.

Customised in-flight image data solutions for aircraft

Based on its vast experience and involvement in many projects, AOS can offer a specific solutions system for high-speed image camera needs. Customised cameras can make an impact in acquiring in-flight image data , offering the perfect fit for each application, while remaining economical. AOS has met the needs of many leading manufacturers for high-speed recordings of events during flights.

Standard data and communication standards

AOS cameras comply with IRIG-106 Chapter 10 data format as well as GigE Vision standards. Cameras compliant with these standards are much simpler to support and certify for quality assurance, as required under calibration procedures in ISO 9000.

About AOS Technologies

Founded in 1998, AOS Technologies is located in Baden, Switzerland, close to Zurich Airport. The company's main activities are in the design and manufacturing of digital high-speed cameras for industrial, automotive and military applications. AOS's worldwide renowned customer base has relied on its robustly built and well-designed cameras to carry out critical tests for many years.

INTRACOM AERO DESIGN GmbH

Intracom Aero Designed, formed in 1994, is the aircraft design and manufacturing arm of General Machinery SA, an international company with diverse interests in engineering, transport, travel, ecology and development of new technologies. It joined with the Khrunichev company of Russia to offer the GM-17 light transport in Western markets but, in November 2001, it formed a new alliance with Technoavia, and its associated SmAZ production plant, of the same country. The GM-17 had its public debut at MAKS' 03, Moscow, in August 2003.
It is planned to produce a diverse family of closely related aircraft, including GM-11/12 turboprop trainer/light attack aircraft, GM-16 six-seat amphibian and GM-19 light utility turboprop. Priority is afforded to the GM-19, which will mark a break away from collaboration with Russia and is expected to be a wholly Western European venture.

LIGHT WING AG

Having designed what is now marketed as the Ikarus C 42, Hans Gygax has produced a slightly larger, utility version. This is marketed by Light Wing AG, which was formed in September 2000 to seek launch funding for large-scale production in several applications, particularly glider towing. Manufacture is at Buochs aerodrome.

MSW AVIATION

MSW Aviation was formed in 1991. Its latest product is the Votec 322 aerobatic two-seater.

Established in 1939, Pilatus Aircraft Ltd is now the world’s leading manufacturer of single-engine turboprop aircraft and the only Swiss company to develop, build and sell aircraft and training systems on every continent. Headquartered in Stans, in the heart of Switzerland, Pilatus is also licensed to perform maintenance and conversion work on various aircraft types.
Pilatus PC-12 Corporate, Commuter and Utility Turboprop The PC-12, Pilatus' trend-setting product for the high performance business and utility category, has proven its place in the market. More than 400 PC-12 have been sold to customers all over the world. A very wide range of customers such as the Royal Flying Doctor Service of Australia, the Royal Canadian Mounted Police, commercial operators and of course many corporate operators recognise the many advantages of this versatile aircraft in providing cost-effective, reliable air transport. The PC-12 with its 330 cubic feet (9.3 m3) cabin is able to operate from short fields and is certified for single-pilot commercial IFR operation.
Propulsion is by a single Pratt & Whitney Canada PT6A-67B 1,605 shp turboprop engine, flat rated to 1,200 shp that enables the aircraft to climb to 30,000 feet and to deliver a cruise speed of 270 KTAS. Maximum range with VFR reserves exceeds 2,000 nm (3,700 km). The PC-12's large pressurised cabin accommodates up to nine passengers or carries cargo of 1,410 kg (3,108 lb), or a combination of both. Alternatively, eight passengers can be seated in first class comfort in the executive configuration creating the perfect environment for business travel.
The aircraft includes a complete IFR avionics installation, EFIS instruments, autopilot system, full de-icing equipment, and as standard equipment a large rear cargo door. The easy access to the large cabin is much appreciated by every air ambulance operator.

RUAG AEROSPACE

In 1996, the former Swiss Federal Aircraft Factory Emmen merged with the industrial division of the Swiss Air Force Logistic Command and parts of the Federal Ordnance Office. On 1 January 1999, it was converted from a federal ordnance establishment into a public diversified private company within the RUAG group and renamed Swiss Aircraft and Systems Enterprise Corporation. This title was changed to RUAG Aerospace in 2001, with sites at Emmen, Dübendorf, Stans, Zweisimmen, Interlaken, Lodrino and Alpnach. In 2002, RUAG Aerospace had 1,666 in workforce and turnover of SwFr47 million; factory area totalled 72,960 m2 (785,350 sq ft) and office area 20,635 m2 (222,125 sq ft). Major shareholder is Swiss government.
Main activities are the maintenance, manufacture, modernisation and assembly under licence of military and civil aircraft and guided missiles. R&D activities involve four departments, of which Aerodynamics and Flight Mechanics department has four wind tunnels for speeds up to M4 to M5, and test cells for piston and jet engines with and without afterburners. Structural and Systems Engineering department deals with aircraft and space hardware. Electronics and Missile Systems department deals with all systems aspects of aircraft avionics and missiles. Fourth R&D department is for prototype fabrication, flight test, instrumentation and system environmental testing. The Production department can handle mechanical, sheet metal and composites and electronic, electrical, electromechanical and electro-optical subassemblies.
Recent programmes have included structural improvements to Swiss Air Force Tiger F-5E/Fs and the integration of new systems (smoke systems, target towing, missiles); manufacture and delivery of Rafale drop tanks to Dassault Aviation; assembly of 19 BAe Hawk Mk 66s; integration of AS 532UL Cougars for the Swiss Air Force and assembly of 32 single- and two-seat F-18 Hornets for the Swiss Air Force; it also established engineering support and manufactured leading-edges, rudders and its own low-drag pylons for the last-named.
Current work includes the serial production of rudders for the Boeing 717, wingtips for the Airbus A319/A320/A321, entire wing fiixed trailing-edges for the Airbus A380, the tailplane for the Pilatus PC-12 and the manufacture and ground support of the Ranger UAV and its hydraulic launcher. During 2001 and 2002 it was assembling 10 of the follow-on order for AS 532UL Cougars ordered for the Swiss Air Force in December 1998.
RUAG Aerospace is sole manufacturer of Dragon anti-tank missile; TOW missile programme began 1996; Stinger missile programme began 1989.
RUAG Aerospace is accredited to msintain GE J85 (Tiger) , Adour (Hawk), GE F404 (F/A-18), Makila (Cougar) and PT6A (PC-6, PC-7, PC-9) engines in own workshops. JAR 145 accreditation allows the company to carry out maintenance work at all levels. This includes inspections, repairs, modifications, prototyping and fault elimination. Other specialities include non-destructive testing procedures such as ultrasonic, eddy current and X-ray as well as comprehensive service packages for systems re-engineering.
In collaboration with Contraves, RUAG Aerospace co-manufactures all payload fairings for Ariane IV and V space launchers on behalf of the ESA, ESTEC, CNES and private industry.

SmartFish was established to exploit the aerodynamic advantages of a unique configuration, patented in November 2001, which is based on its piscine namesake. To illustrate the advantages of the design in comparison to existing aircraft, SmartFish has formulated a hypothetical business jet and a sportplane.

STARRAGHECKERT TECHNOLOGY AG

StarragHeckert is a pioneer in 5 axis milling technology for the manufacture of complex components such as impellers, blisks, aircraft structures and blades. Through our own research and development efforts, we have acquired vast experience in the machining of exotic, i.e. difficult-to-cut materials such as titanium, Inconel, high alloy steels and aluminium, whilst reducing cycle times by applying the latest high speed milling techniques.
Our sophisticated machining centers are installed as standalone units or can be integrated in Flexible Manufacturing Systems (FMS). Today, StarragHeckert has become a leading supplier of manufacturing systems to the aerospace and power generation industries. Through the acquisition of the German machine tool builder Heckert in 1998, the product range of the StarragHeckert Group was complemented with a range of 4 axis machining centers of compact and dynamic design.


Index Facebook Search Index Facebook Search